• Water Borehole Drilling Process - 4 Steps in The Water Borehole Drilling Process

    As Nakiso Borehole Drilling, we seek out to be the finest borehole drilling company in Zimbabwe. This is why we maintain the strictest quality standards in the industry and have an unshakeable commitment to sustainable borehole drilling services.


    Nakiso Borehole Drilling is a dynamic leader in the borehole drilling business in Zimbabwe. We are a purpose-driven company that aims to set the standards of excellence for other borehole drilling companies.

    We are building a business in which high standards permeate all aspects of our company.

    Check These 4 Steps in The Water Borehole Drilling Process:


    1. SITING OF THE BOREHOLE – HYDRO-GEOLOGISTS: The first decision of the water borehole drilling process is to determine where to drill. There are many ways in which we can go about deciding where to place the borehole on your property.

    We turn to hydro-geologists who make use of numerous geographical methods to investigate beneath the surface. By employing these geophysical methods, scientists can infer the subsurface geology of an area.

    The geological features of hydrogeological importance, including faults, fractures and lithological contact zones, are targeted for drilling. There is a 60 to 85% success rate in ideal conditions.

    It is even more important for urban clients to use the services of legitimate borehole drilling companies since urban infrastructure such as electrical cables, phone lines and pipelines can prove an even greater challenge during the drill siting phase.
    Water Borehole Drilling Process - 4 Steps in The Water Borehole Drilling Process
    Water Borehole Drilling Process - 4 Steps in The Water Borehole Drilling Process
    2. WATER BOREHOLE DRILLING PROCESS AND CONSTRUCTION OF THE BOREHOLE: Once the drilling target is determined, the next phase is the actual drilling of the borehole. Many people are under the mistaken impression that when you simply drill, there is an immediate endless supply of water.

    There is a lot that needs to happen before this occurs. We will discuss the drilling options available, but the general drilling method used in domestic borehole drilling is known as “down-the-hole” air flush rotary percussion.

    A pneumatic hammer and drill are operated at the end of the drill pipe and rapidly strikes the rock, while the drill pipe is slowly rotated.

    Shattered splinters of rock are removed from the borehole continuously by the air used to drive the hammer. This drilling process is very noisy and can become dusty, muddy and very messy.

    Domestic boreholes are initially drilled at 215mm in diameter through the topsoil and weathered overburden rock. This facilitates the installation of casing of 165mm.

    Casing is usually only required through the unstable overburden. However, high yielding fracture zones may require that the borehole is cased from top to bottom.

    Water Borehole Drilling Process - 4 Steps in The Water Borehole Drilling Process
    3. DETERMINING THE YIELD OF THE BOREHOLE: The accurate yield of a borehole can only be determined by means of an aquifer test. This test involves installing a test pump and pumping the borehole for a period at a given rate while recording the lowering of water level in the borehole.

    The maximum yield of a borehole is achieved by increasing the abstraction rate to yield, resulting in the maximum drawdown of water in the pumping borehole.

    4. PUMPING AND PIPING OF THE BOREHOLE: The final stage of water borehole drilling process requires the pumping and piping of water from the successful borehole.

    The end use of the water will largely determine the type of pumping and reticulation system that will be installed. With too many variations on the nature and type of pump installations to go into detail here, we will discuss the most appropriate options with you in person.
    Water Borehole Drilling Process - 4 Steps in The Water Borehole Drilling Process
    Water Borehole Drilling Process - 4 Steps in The Water Borehole Drilling Process
    Water Borehole Drilling Process - 4 Steps in The Water Borehole Drilling Process
    Water Borehole Drilling Process - 4 Steps in The Water Borehole Drilling Process


    Contact Us:

    Nakiso Borehole Drilling:

    Contact Info:

    +263 78 876 6706 and +263 78 876 6701
    Email: info@nakisoboreholes.co.zw












  • GET A QUOTE!

    Give us a minutes and we will give you a free, no-commitment quote.













    ADDRESS

    45 Glenara South,
    Eastlea, Harare

    EMAIL

    info@nakisoboreholes.co.zw
    admin@nakisoboreholes.co.zw

    TELEPHONE

    +263 78 876 6706
    +263 78 876 6701

    MOBILE

    +263 867 71 88844
    +263 242 48 0141